Mini Z RCP Race Tracks

We carry two different sizes of track. Our 50cm tracks incorporate square tiles measuring 20" x 20". With a standard two tile width track, the lane width from inside to inside rail is 33". Our 30cm tracks incorporate square tiles measuring 12" x 12". With a standard two tile width track, the lane width from inside to inside rail is 19".  By adding blank tiles from either our expansion kits or blank tile kits, you can increase the lane width in increments of 20" (50cm tracks) and 12" (30cm tracks). 

Please note, due to the manufacturing process that creates the rough surface and temperature changes from the factory, there can be up to a 1/16th of an inch or greater difference in tile thickness. 1/24th scale cars and larger don't usually have an issue with the tile thickness difference, but when smaller RC cars are used, users may need to put a piece of tape under the thinner tile at the joint to help even out the surfaces.

*The track can be used with most 1/27, 1/24, 1/16, 1/18 and 1/10 scale electric on-road and off-road cars. (1/10 cars use caution and taller rails may be required to keep the cars in the track)

**Meets ASTM F963-08 Standard Consumer Safety Specifications on Toy Safety



See all 50cm Tracks



See all 30cm Tracks



See all RCP Track Accessorie



Refine Search