Arrows T-28 Trojan 1100mm PNP
The North American T-28 ‘Trojan’, a piston powered two seater trainer aircraft, was the last piston powered trainer to enter service with the United States Air Force and Navy. Designed in the 1950’s, this aircraft played a key role in helping pilots transition from basic trainers to jet aircraft.
The T-28 version we are offering is based on a plane that was restored to airworthy in 1991-1994. It has the distinctive “Just Dreamin'” nose art as shown below. Our version has a separate decal of the nose art so it’s up to you whether or not to apply it.
The Arrows T-28 is one of the easiest flying aircraft on the market today. A beginner with basic flight experience could easily fly the T-28 with ease- without the assistance of a gyro system.
Featuring a realistic three bladed propeller, rivets, panel lines, retracts, landing gear doors and functional flaps, the T-28 looks as real as its full sized counterpart.
A powerful 40A ESC and 3536 850kV power system provides more than adequate thrust whenever necessary.
The Arrows Hobby T-28 is a perfect aircraft for pilots transitioning from high winged aircraft and those who are looking for a scale aircraft that is easy to fly.
Features:
- High power-to-weight ratio
- Realistic scale details
- Simple yet robust airframe
- Easy assembly
- No glue required
- Environmentally friendly water-based paint
Includes:
- T-28
- 3536 850kV outrunner brushless motor (installed)
- 40A ESC installed
- Electronic retractable landing gear (installed)
- Servos (installed)
Requires:
- 6-Channel radio transmitter
- 6-Channel receiver
- 3-Cell 11.1V 2200mAh LiPo battery
- 3-Cell compatible battery charger
Needed to Complete
6 Channel receiver
3 Cell 11. 2200mAh LiPo battery
3 Cell compatible battery charger
What’s in the Box?
3536-Kv850 outrunner brushless motor (installed)
40A ESC
Electronic retractable landing gear (installed)
Servos, installed)
Specifications
Wingspan: 1100mm (43.3in)
Length: 915mm (36.0in)
CG (Center of Gravity): 55-62mm from leading edge
Power System: 3638-850kV Brushless Outrunner Motor
Electronic Speed Control: 40A
Propeller / EDF: 10 x 7 x 3
Servos: 9 gram servo X 7
Landing Gear: Electronic retractable main gear and steerable nose gear
Required Battery: 3S 2200mAh LiPo required
Required Radio: 6 Channel transmitter and receiver required
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes
Lights: No
Hinge Type: Foam
Material: EPO Foam
Skill Level: Intermediate
Build Time: 1-2 Hours
Recommended Environment: Outdoor, 100 foot paved runway or short manicured grass