MZ Formula MZF-F87 ’87 Body Shell Set for Kyosho Mini-Z MR-03

MZ Formula MZF-F87 ’87 Body Shell Set for Kyosho Mini-Z MR-03

What is MZ FORMULA?
The Kyosho Mini-Z Racer MR-03 transforms into a formula car The concept behind MZ FORMULA is to attach a formula-type body to the Kyosho Mini-Z MR-03 chassis, and enjoy a casual F1 experience.
This first release features a body that evokes the formula cars of the 1980s.

Details:
• Each part is unpainted. Please paint them in your favorite colors and enjoy
• Compatible with the Kyosho Mini-Z Racer MR-03 (RM) with the S wheelbase. If you have a current ReadySet MR-03 MM, you will need Kyosho MZ216B Motor case set/Type RM (for MR-03) for the chassis conversion
• Compatible with W (wide) front width
• The dedicated wheels are sold separately (MZF-W01F/W01R). Please use the tires for Kyosho Mini-Z Racer
• Can be equipped with an IC tag
• This product is not an official Kyosho product
• Manufacturing method: 3D printing
• Material: High toughness resin

Includes:
1 – Front Wing (with front bumper mounting boss)
1 – Body
1 – Rear Wing
1 – Driver’s Helmet (with mounting screws)

Requires:
(Not Included)
2 – Front Wheels Set MZF-W01F
2 – Rear Wheels Set MZF-W01R

Recommended Tires:
(Not Included)
Front – MZW39-30 Mini-Z Low Height Slick Tires 30° (4 pieces, wide tire specification with 2 tires used on one wheel)
Rear – MZW17-20(B) Wide Tire Set (20°, 4 pieces, wide tire specification with 2 tires used on one wheel)

Notes:
Although high toughness resin materials are used at the time of release, please note that the strength is lower compared to ABS and similar materials, and it is prone to cracking when exceeding the bending limit.
Since the product is produced by 3D printing, there may be support materials and traces remaining. Please remove them before use.
Due to the manufacturing process with a 3D printer, there may be slight dimensional errors. Please note that some processing may be required for installation.
The main material is UV resin, so please avoid direct sunlight and storage/use at high temperatures (above 40 degrees Celsius).
The image is under development, and the specifications of the product may change.
The product specifications are subject to change without notice.