MZF-W01F Wheel Type A, Front – Set of 2 (for MZ FORMULA)
Installation:
To install, a 4.5mm box wrench capable of removing and attaching nuts in a deep position is required
Recommended Tires:
Front – MZW39-30 Mini-Z Narrow Low Height Slick Tires 30°
(4 pieces, Narrow tire specification with 2 tires used on one wheel)
Dimensions:
Width- 16mm
Height – 22.8mm
Includes:
2 – Front Wheels
Notes:
Although high toughness resin materials are used at the time of release, please note that the strength is lower compared to ABS and similar materials, and it is prone to cracking when exceeding the bending limit.
Since the product is produced by 3D printing, there may be support materials and traces remaining. Please remove them before use.
Due to the manufacturing process with a 3D printer, there may be slight dimensional errors. Please note that some processing may be required for installation.
The main material is UV resin, so please avoid direct sunlight and storage/use at high temperatures (above 40 degrees Celsius).
The image is under development, and the specifications of the product may change.
The product specifications are subject to change without notice.
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 5 × 3 in |
